while the internal combustion engine is started concrete mixer manufacturer, is strictly prohibited slam acceleration, should be at a speed of 500 to 600 R / min, stirring station and stable operation of the revolutions per minute, a motion in internal combustion engine parts get good lubrication, with temperature rise of commodity concrete mixing station gradually with the increase of rotational speed. In the cold season, you must first of commercial concrete mixing station of internal combustion engine is preheated before start. The engine reaches the rated temperature, with cylinder head screw according to the prescribed procedures and torque tighten with vision wrench one by one, in the run in period of not less than 2 times cement mixer .Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:double horizontal shaft concrete mixer,concrete batching plants,concrete mixer,blocking making machine,concrete pump,etc. 4) station in the expiration of commercial concrete mixing, replace the engine crankcase oil, cleaning and lubricating system, replacement filter. At the same time should check the commercial concrete mixing station of the cleaning gear lubricating Bo, replace if necessary. At the same time to adjust, tighten the running in period after the maintenance operations, and to remove the internal combustion engine speed limit device cement mixers .
↧
