The following is a detailed introduction to the forced mixer motor inspection preparation work?Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:mobile concrete batch plant,concrete batching plants,concrete mixer,blocking making machine,concrete pump,etc. 1, check the power supply voltage and the mixer is consistent with the rated voltage concrete tools .2, the motor leads to the connection with the electronic governor cement mixers .3 diesel concrete mixers for sale, the electronic governor and electrically connected after the debugging speed, then check whether the control knob at the start. Should not be fitted with a stir bar, in order to ensure safety. Plug in the power plug, open the electronic governor power switch. If there is a device to start, start with 0 adjustable screwdriver. According to the direction of the motor will be transferred to 60 rpm / min, speed is uniform, such as the steady speed can be used.4, the stirring rod is installed in the chuck clamping, can be put into the stirring cement mixer .
↧